Finite element analysis of the plastic buckling of a cantilever beam

Yuan, Qizhong (1998) Finite element analysis of the plastic buckling of a cantilever beam. Masters thesis, Memorial University of Newfoundland.

[img] [English] PDF (Migrated (PDF/A Conversion) from original format: (application/pdf)) - Accepted Version
Available under License - The author retains copyright ownership and moral rights in this thesis. Neither the thesis nor substantial extracts from it may be printed or otherwise reproduced without the author's permission.

Download (9MB)
  • [img] [English] PDF - Accepted Version
    Available under License - The author retains copyright ownership and moral rights in this thesis. Neither the thesis nor substantial extracts from it may be printed or otherwise reproduced without the author's permission.
    (Original Version)

Abstract

Finite element analysis offers a general plastic buckling solution of structures by employing a nonlinear static plastic analysis with gradually increasing loads to seek the load level at which the structure becomes unstable. Nonlinear plastic finite element analysis requires inclusion of geometric nonlinearities and material nonlinearities in the model. Geometric nonlinearities refer to the nonlinearities in the structure due to changing geometry as it deflects. There are two kinds of geometric nonlinearities concerned in plastic buckling analysis, large strain and large deflection. On the present work, Newton-Raphson procedure, a process to solve the nonlinear equations by increasing load in several steps and iterative computation to reach the convergence criteria, is applied for the plastic buckling analysis. -- A general model for rectangular cross section cantilever beams is presented, which flexibly defines the material property and dimensions of a cantilever beam. Overall behavior of the beam is studied by combining analytical methods for elastic buckling analysis and finite element analysis for plastic buckling analysis. Two non-dimensional parameter ratios of thickness by length t/l and ratio of height by thickness h/t are used to evaluate the overall behavior of a cantilever beam. The two boundaries of elastic buckling and yielding, and plastic buckling and collapse are also investigated.

Item Type: Thesis (Masters)
URI: http://research.library.mun.ca/id/eprint/815
Item ID: 815
Additional Information: Bibliography: leaves 86-88
Department(s): Engineering and Applied Science, Faculty of
Date: 1998
Date Type: Submission
Library of Congress Subject Heading: Buckling (Mechanics)--Mathematical models; Plasticity; Girders

Actions (login required)

View Item View Item

Downloads

Downloads per month over the past year

View more statistics