Bit wear analysis and optimization for vibration assisted rotary drilling (VARD) using impregnated diamond bits

Abtahi, Alireza (2011) Bit wear analysis and optimization for vibration assisted rotary drilling (VARD) using impregnated diamond bits. Masters thesis, Memorial University of Newfoundland.

[English] PDF - Accepted Version Available under License - The author retains copyright ownership and moral rights in this thesis. Neither the thesis nor substantial extracts from it may be printed or otherwise reproduced without the author's permission. Download (31MB)

Abstract

The effect of vibrations on bit wear and the rate of penetration in rotary drilling was investigated. A laboratory scale drilling rig was used for experiments with capability of controlling important drilling factors such as WOB (Weight On Bit), flow rate, RPM, and vibration. Vibration under different amplitudes was studied using impregnated diamond coring bits. The main goal of this study is to find the optimum drilling conditions considering both ROP (Rate Of Penetration) and wear including the effect of vibration. -- Bit profile shape was found to be another important factor affecting ROP and bit wear. In all experiments, three main profile shapes appeared after some drilling in the sequence of: V-grooved, flat end, and rounded edge. The highest ROP results were obtained with V-grooved, decreasing in the order: unused, flat end, and rounded edge. Vibration had more effect on bit wear than profile shape. Profile shapes with sharper edges wore away rapidly -- Wear and bit profile changes should be taken into account in a study to relate ROP to WOE. Otherwise, the relationship observed between these variables may not be correct.

Actions (login required)

View Item