Charge transport in polypyrrole-based conducting polymers

Ren, Xiaoming (1993) Charge transport in polypyrrole-based conducting polymers. Doctoral (PhD) thesis, Memorial University of Newfoundland.

[img] [English] PDF (Migrated (PDF/A Conversion) from original format: (application/pdf)) - Accepted Version
Available under License - The author retains copyright ownership and moral rights in this thesis. Neither the thesis nor substantial extracts from it may be printed or otherwise reproduced without the author's permission.

Download (33MB)
  • [img] [English] PDF - Accepted Version
    Available under License - The author retains copyright ownership and moral rights in this thesis. Neither the thesis nor substantial extracts from it may be printed or otherwise reproduced without the author's permission.
    (Original Version)

Abstract

Impedance spectroscopy has been used to study polypyrrole/perchlorate (PPY/CIO₄), PPY/poly(styrene sulphonate) (PPY/PSS), poly-(3-methyl-pyrrole-4-carboxylic acid) (poly-MPCA), poly-[1-methyl-3-(pyrrol-1-ylmethyl)pyridinium] (poly-MPMP), bilayers of PPY/CIO₄ and PPY/PSS, and polypyrrole formed in mixed perchlorate and poly(styrene sulphonate) (PPY/CIO₄ +PSS) polymer films coated Pt electrodes in electrolyte solutions. All impedance responses can be modelled with a porous electrode theory to extract reliable electronic and ionic conductivities, which agree with the results of other independent measurements. -- The impedances of PPY/CIO₄ and PPY/PSS reveal dominant anion and cation transport, respectively, in these polymers. A strong interaction between the anions and the positive charges on the oxidized polypyrrole chains hinders anion movement in PPY/CIO₄. Absence of such an interaction for the mobile cations in PPY/PSS gives this polymer a ca. 20 times higher ionic conductivity than PPY/CIO₄. -- Deviation from the ideal model impedance response occurs for poly-MPCA because of its non-uniform structure. Mixed ion conduction can cause another type of deviation as shown by the impedance of PPY/CIO₄ +PSS polymers and the simulated data. High frequency data for reduced films of PPY/PSS and poly-MPCA form a semicircle in the complex impedance plane. This semicircle is attributed to electron transfer at the Pt/polymer interface for PPY/PSS but ion transfer at the polymer/solution interface for poly-MPCA. -- The impedances of the PPY/CIO₄ and PPY/PSS bilayer films show that the location of the initial reaction induced by a potential perturbation for a highly conducting PPY film coated electrode is at the polymer/solution interface. The impedances of poly-MPMP and PPY/PSS show that the location of the initial reaction depends on the relative magnitudes of the film's electronic and ionic conductivities, as theoretically predicted. -- Ionic conductivity measurements were used to probe polymer structure. Films of PPY/CIO₄, PPY/PSS and poly-MPCA all have a two phase structure, a polymer phase and a pore solution phase. Ionic conduction in the polymer phase occurs mainly through the movement of mobile counterions via an ion-exchanging process, while in the pore solution phase migration of both electrolyte cations and anions contributes to conduction.

Item Type: Thesis (Doctoral (PhD))
URI: http://research.library.mun.ca/id/eprint/4270
Item ID: 4270
Additional Information: Includes bibliographical references.
Department(s): Science, Faculty of > Chemistry
Date: 1993
Date Type: Submission
Library of Congress Subject Heading: Conducting polymers; Polymerization; Impedance spectroscopy; Charge transfer

Actions (login required)

View Item View Item

Downloads

Downloads per month over the past year

View more statistics