Development of a hybrid anti-icing coating with superhydrophobic and electrothermal properties

Sullivan, Andrew G. (2022) Development of a hybrid anti-icing coating with superhydrophobic and electrothermal properties. Masters thesis, Memorial University of Newfoundland.

[img] [English] PDF - Accepted Version
Available under License - The author retains copyright ownership and moral rights in this thesis. Neither the thesis nor substantial extracts from it may be printed or otherwise reproduced without the author's permission.

Download (4MB)

Abstract

This work involves the development of a hybrid anti-icing coating. The multi-layered coating consists of an electrothermal heating film and superhydrophobic top coating. The heating film is composed of a thin layer of conductive copper-based epoxy, insulated between layers of a polydimethylsiloxane (PDMS) elastomer. The superhydrophobic coating is based on FAS-13 modified SiO₂ nanoparticles dispersed in a PDMS matrix. The composite coating was applied to a stainless steel substrate by consecutively depositing each layer by spray-coating. The SiO₂/PDMS coating exhibited a static contact angle of 164.3° and contact angle hysteresis of 2.8°, confirming its superhydrophobic properties. The anti-icing properties of the superhydrophobic coating were investigated experimentally inside a cold chamber at -20°C. The ice adhesion strength was reduced from 284 kPa on the untreated substrate to 50 kPa on the superhydrophobic coating, while the droplet freezing time was delayed from 8 seconds to 76 seconds. The heating film demonstrated a fast thermal response and excellent thermal stability. With the maximum surface power density of 3.46 W/cm², the surface temperature of the heating film could be raised to 10°C in just 45 seconds. In simulated spray-icing tests, the hybrid superhydrophobic-heating film achieved complete anti-icing with a minimum surface power density of 0.26 W/cm². Consequently, the superhydrophobic coating was found to reduce the energy required for anti-icing of the heating film by 41%. The hybrid coating was found to be durable and retained its superhydrophobicity after being subjected to repeated icing and de-icing cycles. The results demonstrate that the hybrid coating has potential for practical applications in the marine and offshore industries due to its simple, versatile fabrication process and energy-efficient anti-icing performance.

Item Type: Thesis (Masters)
URI: http://research.library.mun.ca/id/eprint/15646
Item ID: 15646
Additional Information: Includes bibliographical references (pages 92-99)
Keywords: anti-icing, de-icing, superhydrophobic, electrothermal, hybrid coating
Department(s): UNSPECIFIED
Date: October 2022
Date Type: Submission
Digital Object Identifier (DOI): https://doi.org/10.48336/0WRB-NH48
Library of Congress Subject Heading: Ice prevention and control; Hydrophobic surfaces; Thermal conductivity; Coatings

Actions (login required)

View Item View Item

Downloads

Downloads per month over the past year

View more statistics