Experimental study on kinetic to thermal energy conversion with fluid agitation

Javed, Muhammad Haseeb (2021) Experimental study on kinetic to thermal energy conversion with fluid agitation. Masters thesis, Memorial University of Newfoundland.

[img] [English] PDF - Accepted Version
Available under License - The author retains copyright ownership and moral rights in this thesis. Neither the thesis nor substantial extracts from it may be printed or otherwise reproduced without the author's permission.

Download (2MB)

Abstract

Modern wind turbines are generally used for electricity generation; however, the final form of energy required by many users is thermal energy. Although electrical energy conversion to thermal energy is a high-efficiency process, the efficiency of electricity generation from wind turbines is usually low. In this thesis, a heat generator with fluid agitation is developed and studied. This heat generator converts kinetic energy (e.g. that from a wind turbine) directly to thermal energy through the process of viscous dissipation; this process is achieved through the agitation of the working fluid inside a container. This heat generator uses an optimized flat blade turbine (FBT) impeller and a fully baffled configuration. An electric motor is used to provide the kinetic energy input to the heat generator. A torque sensor, a tachometer, and thermocouples are used to measure the torque, rotational speed (RPM,) and temperature rise in the fluid, respectively. Using the measured quantities, the efficiency of kinetic energy to sensible heat conversion is calculated. Experiments are conducted at different rotational speeds and for different working fluids: distilled water, ethylene glycol, and their respective nanofluids with Al₂O₃ nanoparticles at different concentrations. The experimental results indicate that the heat generator is up to 90% efficient in converting kinetic energy to thermal energy. The temperature rise rate increases with the rotational speed and larger diameter of the impeller. Furthermore, the addition of nanoparticles improves the thermal properties of the fluid, but it does not significantly affect the energy conversion efficiency or the rate of temperature rise in the fluid. A wind turbine can power this heat generator to provide heat to a house or a commercial building. This innovative renewable energy technology would benefit wind rich remote areas with cold weather.

Item Type: Thesis (Masters)
URI: http://research.library.mun.ca/id/eprint/15485
Item ID: 15485
Additional Information: Includes bibliographical references (pages 71-83).
Keywords: turbulence, kinetic to thermal energy conversion, renewable energy, viscous dissipation, heat generator
Department(s): Engineering and Applied Science, Faculty of
Date: May 2021
Date Type: Submission
Digital Object Identifier (DOI): https://doi.org/10.48336/K8W7-JN13
Library of Congress Subject Heading: Wind turbines; Heat--Transmission; Thermodynamics; Energy conversion.

Actions (login required)

View Item View Item

Downloads

Downloads per month over the past year

View more statistics